4 Reasons to Have Your Home’s Heating System Professionally Inspected This Fall

When summer heat rolls in, your home's air conditioning system becomes essential for comfort and safety. But like any mechanical system, your AC unit can develop issues over time. If these problems are caught early, you may be able to avoid a complete breakdown and costlier repairs. Understanding the warning signs of AC trouble can help you know when to call a professional before a minor issue becomes a major headache. At River City Heating & Air, we provide expert AC repair in the greater Bismarck, ND area. Here are four common signs that your home's AC system is in need of service. Weak Airflow from Vents If you’ve noticed that the airflow coming from your vents feels weaker than usual, this may be a sign that your AC system is struggling. Weak airflow could be caused by a clogged air filter, ductwork issues, or a failing blower motor. Regardless of the cause, limited airflow makes it harder to cool your home efficiently and can lead to uneven temperatures from room to room. It’s a sign that something in the system needs attention. Warm Air Instead of Cool Air When your AC system blows warm or room-temperature air, even though the thermostat is set to cooling mode, there’s likely a significant issue. This could stem from low refrigerant levels or a malfunctioning compressor. Whatever the cause, it means your AC isn’t performing its primary function. Warm air output should always be investigated promptly to restore comfort and prevent further damage. Strange Noises During Operation An air conditioning system should run relatively quietly, with only a soft hum or whoosh of air being noticeable. If you start hearing grinding, squealing, clanging, or banging sounds, it’s often a sign that a mechanical component is loose or failing. These sounds might indicate problems with the fan motor, belts, or internal parts of the compressor. Ignoring these noises can lead to system failure, so it's best to call an HVAC technician for an inspection. Unusually High Energy Bills If your energy bills have suddenly spiked without a corresponding increase in usage, your AC system may be the culprit. Aging or malfunctioning components force the system to work harder, drawing more energy to maintain the desired temperature. This inefficiency not only costs more in monthly bills, but also puts strain on your unit, increasing the risk of future repairs or replacements. AC Repair in Bismarck, ND When you need HVAC service in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. We can expertly address your residential and commercial HVAC needs. Feel free to give us a call to schedule an appointment!

Your home’s air conditioning system works hard to keep you cool and comfortable during the warmer months. But like any mechanical system, it needs regular attention to stay efficient and reliable. While it might be tempting to skip routine service or handle maintenance on your own, having your AC professionally maintained offers significant long-term benefits. At River City Heating & Air, we provide expert HVAC maintenance in the greater Bismarck, ND area. Here are four reasons why it’s worth investing in professional maintenance for your home’s AC system. Improved Energy-Efficiency When an air conditioning system is cleaned and fine-tuned by a professional, it runs more efficiently. Dust buildup, clogged filters, and worn components can force your AC to work harder than necessary, leading to higher energy bills. The technician can inspect, clean, and optimize the system, helping it use less electricity to cool your home. This improved efficiency not only lowers monthly utility costs, but also reduces your environmental impact. Prevent Breakdowns on Hot Days One of the biggest advantages of professional maintenance is the ability to catch small problems before they turn into major repairs. Technicians are trained to identify early signs of wear, damage, or malfunction during routine inspections. By addressing these issues proactively, you reduce the risk of your AC system breaking down unexpectedly in the middle of a heatwave. Fewer breakdowns mean less inconvenience and fewer emergency service calls. Longer System Lifespan Regular maintenance helps extend the life of your air conditioning system. Just like regular oil changes help your car’s engine last longer, professional AC service keeps all the parts of your cooling system working smoothly and in sync. When components are clean, lubricated, and adjusted properly, the system experiences less strain, reducing the chances of early failure. With proper care, your AC can deliver reliable performance for many years. Better Indoor Air Quality A well-maintained AC system does more than just cool the air—it also helps filter out dust, pollen, and other airborne contaminants. When filters and coils are dirty, those particles can circulate through your home, impacting air quality. During a professional tune-up, the technician can clean or replace filters and inspect the system to help ensure it’s promoting healthy air in your living space. AC Maintenance in Bismarck, ND For expert HVAC service in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. Feel free to give us a call to make an appointment!

As temperatures rise during the summer months, so can your utility bills—especially if your air conditioning system is working overtime. While staying cool is essential, there are smart ways to manage your energy use without sacrificing comfort. With a few practical changes, you can reduce strain on your AC system and help keep your electricity costs in check. Here are five tips for keeping your AC bill lower this summer. Use a Programmable Thermostat One of the easiest ways to control your cooling costs is by using a programmable thermostat. This allows you to set temperature schedules that match your daily routine. For example, you can set the temperature higher when you're away from home and lower it when you're back. This helps your system run more efficiently and prevents unnecessary energy use. Close Curtains and Blinds During the Day Sunlight streaming through your windows can significantly increase the indoor temperature, forcing your AC to work harder. Keeping your curtains or blinds closed during the hottest parts of the day can reduce indoor heat gain and help maintain a cooler environment. Seal Air Leaks and Insulate Properly If your home has air leaks or inadequate insulation, cooled air can escape, and hot outdoor air can enter. This makes your AC system run longer and work harder than it needs to. Sealing gaps around windows, doors, and ductwork can help prevent air loss. Making sure your attic and walls are well-insulated will also help your home retain cool air longer, improving overall efficiency. Use Fans to Support Cooling Ceiling fans can help circulate air more effectively, potentially allowing you to raise the thermostat a few degrees without losing comfort. Fans create a wind-chill effect that makes you feel cooler, even if the air temperature remains the same. Just remember to turn fans off when you leave the room, as they cool people, not spaces. Maintain Your AC System Regular maintenance is key to keeping your air conditioner running at peak performance. This includes changing the air filter every one to three months, cleaning the condenser coils, and checking refrigerant levels. Scheduling an annual tune-up with a professional technician can also catch minor issues before they turn into costly repairs, helping your system run smoothly all season long. AC Service in Bismarck, ND When you need HVAC service in Bismarck, ND and the surrounding area, contact River City Heating & Air at (701) 561-0804. Feel free to give us a call to schedule an appointment!

When temperatures start to rise, your air conditioning system becomes one of the most important features of your home. Taking the time to prepare your system before the peak of the season can prevent unexpected breakdowns and ensure maximum efficiency when you need it most. At River City Heating & Air, we provide expert AC service in the greater Bismarck, ND area. Here are five ways to get your AC system summer-ready. Schedule a Professional Tune-Up One of the best steps you can take before summer is to schedule a professional inspection and tune-up. An HVAC technician will check all the key components of your system. Routine maintenance ensures that your system is running smoothly and efficiently. A professional can also catch any minor issues before they turn into major repairs during a heatwave. Replace or Clean the Air Filter Your AC’s air filter plays a big role in how well your system runs. A dirty or clogged filter restricts airflow, making your AC work harder to cool your home. This can reduce energy-efficiency and can also lead to poor indoor air quality. Check the filter at the start of the season and replace it if it looks dirty. If you have pets or allergies, consider replacing it more frequently throughout the summer. Clean the Outdoor Unit Your AC’s outdoor condenser unit is exposed to the elements year-round. Leaves, dirt, and debris can build up around it, reducing its ability to release heat. Before the hot weather hits, make sure the area around the unit is clear and free of obstructions. Check and Seal Ductwork Leaky or poorly sealed ductwork can lead to cooled air escaping before it reaches the rooms in your home. This means your AC has to work harder, which drives up your energy bills and reduces comfort. For a thorough inspection, consider having a professional evaluate your entire duct system. Test the Thermostat Before the summer heat hits full force, test your thermostat to make sure it’s reading temperatures accurately. Consider upgrading to a programmable or smart thermostat if you haven’t already. These devices allow you to set schedules and control temperatures more precisely, helping you stay cool and save energy during the hottest months of the year. AC Service in Bismarck, ND When you need HVAC service in Bismarck, ND and the surrounding area, contact River City Heating & Air at (701) 561-0804. Feel free to give us a call to make an appointment!

The ductwork in a commercial building plays a crucial role in maintaining proper airflow, temperature control, and indoor air quality. If the ductwork is damaged or inefficient, it can lead to increased energy costs and reduced comfort. At River City Heating & Air, we provide expert commercial ductwork services in the greater Bismarck, ND area. Here are four signs of an issue with your commercial building’s ductwork. Uneven Heating and Cooling Throughout the Building One of the most common signs of ductwork problems is inconsistent temperatures in different areas of the building. If some rooms are significantly warmer or cooler than others, it could indicate that air is not being distributed properly. Leaks, blockages, or poorly designed ducts can restrict airflow, making it difficult for your HVAC system to maintain even temperatures. Employees and customers may complain about discomfort, which can negatively impact productivity and business operations. Rising Energy Bills Without Increased Usage If your commercial building's energy bills have been steadily increasing despite no major changes in usage, your ductwork may be to blame. Leaky or damaged ducts allow conditioned air to escape before it reaches its intended destination, forcing your HVAC system to work harder to compensate for the lost air. This increased strain on the system leads to higher energy consumption and unnecessary costs. Unusual Noises Coming from the Ducts While some noise from HVAC systems is normal, loud rattling, banging, or whistling sounds coming from the ductwork could indicate loose connections, air leaks, or structural damage. Vibrations from loose duct sections can create noticeable noises, while whistling sounds often signal gaps where air is escaping. If left unaddressed, these issues can worsen. Having a professional inspect the ductwork can help identify and resolve these problems before they escalate. Weak or Inconsistent Airflow from Vents If some areas of your commercial building experience weak or fluctuating airflow, it may be due to ductwork obstructions or damage. Poor airflow not only affects comfort, but can also put unnecessary strain on heating and cooling equipment, shortening its lifespan. Commercial Ductwork in Bismarck, ND For HVAC service in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. Feel free to give us a call to schedule an appointment!

A properly functioning furnace is essential for keeping your home warm and comfortable. While some minor furnace issues can be resolved with simple maintenance, others require more complex work to ensure safety and efficiency. Ignoring these problems could lead to more significant damage or even hazardous conditions in your home. At River City Heating & Air, we provide expert furnace service in the greater Bismarck, ND area. Here are four common furnace problems that should be addressed by a qualified HVAC technician. Frequent Cycling If your furnace is constantly turning on and off in short bursts, known as short cycling, it could indicate a serious issue. A clogged air filter or a malfunctioning thermostat may be to blame. However, short cycling can also result from a more complex problem, such as a cracked heat exchanger. An HVAC technician can diagnose the exact cause and make the necessary repairs. Pilot Light or Ignition Problems Gas furnaces rely on either a standing pilot light or an electronic ignition system to function properly. If the pilot light frequently goes out or the electronic ignition fails, the furnace won’t be able to generate heat. Issues with the thermocouple or gas supply can contribute to ignition problems. Because these components involve gas and electrical connections, attempting DIY repairs can be dangerous. An HVAC professional can safely assess and fix the issue. Unusual Noises A furnace naturally makes some noise when operating, but strange sounds like screeching or rattling indicate an underlying problem. Screeching can result from a worn-out blower motor belt. Rattling sounds often point to loose components or a cracked heat exchanger. Since some of these issues can lead to dangerous conditions, it’s crucial to have a technician inspect and repair the furnace immediately. Gas Leaks or Carbon Monoxide Issues One of the most dangerous furnace problems is a gas leak or carbon monoxide leak. If you notice a rotten egg smell, feel dizzy, or experience flu-like symptoms while your furnace is running, leave your home immediately and call an HVAC technician. Regular furnace inspections can help detect leaks early and prevent life-threatening exposure. Furnace Repair in Bismarck, ND For HVAC service in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. Feel free to give us a call to schedule an appointment!

For several good reasons, tankless water heaters have gained popularity in recent years. As opposed to traditional water heaters with large storage tanks, tankless models heat water only when you need it. This modern approach to water heating offers several benefits that make it an appealing choice for many homeowners. At River City Heating & Air, we provide expert tankless water heater installation in the greater Bismarck, ND area. Here’s a look at five advantages of tankless water heaters. Energy-Efficiency One of the biggest benefits of a tankless water heater is its energy-efficiency. Traditional water heaters continuously heat and reheat water stored in a tank, which can lead to significant energy loss over time. Tankless systems, on the other hand, only activate when you turn on a hot water tap. This on-demand operation reduces energy consumption, leading to lower utility bills and a smaller environmental footprint. Unlimited Hot Water With a tankless water heater, you don’t have to worry about running out of hot water during a long shower or when multiple appliances are in use. These systems heat water as it flows through the unit, providing a continuous supply. Even with a large family, a tankless water heater can meet high-demand needs without the limitations of a storage tank. Space-Saving Design Traditional water heaters with large tanks can take up considerable space in your home. In contrast, tankless water heaters are compact and can be mounted on a wall, freeing up valuable floor space. This is particularly beneficial for smaller homes or apartments where storage space is at a premium. Longer Lifespan Tankless water heaters generally last longer than traditional tank-style models. While a conventional water heater may last around 8 to 12 years, tankless units often have a lifespan of 20 years or more with proper maintenance. This durability makes them a cost-effective investment, as you won’t need to replace the system as frequently. Reduced Risk of Water Damage Since tankless water heaters do not rely on a large storage tank, you don’t face the risk of tank failure causing water damage to your home. Traditional water heaters can develop issues like rust, which may lead to leaks. With a tankless system, you eliminate the worry of flooding from a tank failure. Tankless Water Heaters in Bismarck, ND For water heater services in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. Our nearby HVAC company specializes in water heater sales and service, as well as other heating and cooling needs. Feel free to give us a call to make an appointment!

Modern furnaces rely on electrical components to function efficiently and safely. When these components malfunction, the system can fail to heat properly or stop working altogether. Understanding common electrical issues can help you identify problems quickly. At River City Heating & Air, we provide expert furnace repair in the greater Bismarck, ND area Here’s a look at four electrical problems that are often found in furnaces. Faulty Thermostat Connections The thermostat is the furnace’s control center, communicating when to start or stop heating. If the electrical connection between the thermostat and the furnace is faulty, the system may not respond as expected. Loose wires, corroded terminals, or a failing thermostat can disrupt this communication and lead to inconsistent heating or complete failure to activate. Blown Fuses or Tripped Breakers Furnaces consume significant power to run components like the blower motor and ignition system. If a fuse blows or a breaker trips, the furnace will shut down to prevent electrical overload. These issues can occur due to power surges or an overworked system. Repeated occurrences often indicate deeper electrical issues that need professional attention. Malfunctioning Blower Motor The blower motor sends heated air through your home. If it fails due to electrical problems, such as a burnt-out motor or a capacitor issue, the furnace will struggle to maintain proper airflow. You might hear unusual noises or notice weak airflow from the vents, signaling that the blower motor requires repair or replacement. Shorted or Damaged Wiring Over time, furnace wiring can become damaged due to wear, pests, or environmental factors. Damaged wires are common culprits behind furnace malfunctions. Problems with wiring can cause intermittent operation, prevent the system from starting, or even pose fire risks. A thorough inspection of the wiring by a qualified technician is essential to address these problems safely. Furnace Repair in Bismarck, ND When you need heating system repair in Bismarck, ND and the surrounding area, contact River City Heating & Air at (701) 561-0804. Our nearby HVAC company can expertly address your residential and commercial heating system needs. Feel free to give us a call to make an appointment!

A reliable water heater is essential for daily comfort, providing hot water for showers, dishes, and laundry. However, like any appliance, water heaters can develop problems. Recognizing the warning signs early can help prevent more significant issues. At River City Heating & Air, we provide expert water heater repair and replacement in the greater Bismarck, ND area. Here are five common signs of a water heater problem. Inconsistent Water Temperature If your water heater struggles to maintain a consistent temperature, it could indicate a failing heating element, sediment buildup, or a malfunctioning thermostat. Addressing this issue promptly may prevent further wear on the unit. Reduced Hot Water Supply When your water heater no longer produces as much hot water as it used to, it’s often a sign of sediment accumulation in the tank. Sediment reduces the tank's capacity and impairs the heating process. If your showers suddenly become shorter because you run out of hot water, it’s time for a professional inspection. Discolored or Rusty Water Rusty or discolored water coming from your hot water taps can indicate corrosion inside the water heater tank or a failing anode rod. The anode rod is designed to protect the tank from rusting, and once it wears out, the tank itself may begin to corrode. Left unchecked, this can lead to leaks or even complete tank failure. Strange Noises from the Tank Popping, rumbling, or banging noises from your water heater are not normal and often result from sediment buildup. These noises signal inefficiency and increased stress on the system, which can shorten the lifespan of the unit. Leaking Around the Water Heater Any signs of water pooling around the base of your water heater should be addressed immediately. Leaks can result from a failing tank, loose connections, or a faulty pressure relief valve. Ignoring a leak can lead to water damage in your home and may require a complete water heater replacement. Water Heater Services in Bismarck, ND For water heater repair in Bismarck and the surrounding area, contact River City Heating & Air at (701) 561-0804. Our nearby HVAC company specializes in water heater service, as well as other heating and cooling needs. Feel free to give us a call to schedule an appointment!